Proizvodni kapacitet
NIIGATA SPN 63
- X – 1000.76mm
- Y – 878.74mm
- Z – 800.01mm
- 4 achse
- Werkzeugmagazin: 130 Stk.
- Max Dregzahl: 12000rpm
- Paletteenwechsler: 2 – fach
OKUMA LR25-M
OKUMA LR25-M CNC Lathe with C Axis Simulated and Driven Tools
- Max. Turning dia o/slide 520 mm dia.
- Max. Turning diameter 340 mm dia.
- Turning Length 850 mm
- Spindle speed Range 40-3500 rpm
- Main motor power 30/22 Kw
- Turret 1 with 12 Stations
- Live Tooling Spindle speeds 100-3000 rpm
- Turret 2 with 10 Stations
- Accessories:
Tailstock, Chip conveyor. - C Axis – Mainspindle Stroke 0.001 Manuals
KITAMURA H400
- X – 610mm
- Y – 480mm
- Z – 510mm
- 4 achse
- Werkzeugmagazin: 100 Stk.
- Max Dregzahl: 10000rpm
- Paletteenwechsler: 2 – fach
MATSUURA MAM 600 HG/PC2
- X – 600mm
- Y – 600mm
- Z – 625mm
- 4 achse
- Werkzeugmagazin: 120 Stk.
- Max Dregzahl: 10000rpm
- Paletteenwechsler: 2 – fach
MATSUURA ES 450
- X – 450mm
- Y – 400mm
- Z – 400mm
- 4 achse
- Werkzeugmagazin: 60 Stk.
- Max Dregzahl: 10000rpm
- Paletteenwechsler: 2 – fach
OKUMA LC 20
- CNC lathe – Okuma
- Type; LC 20-2ST
- Year of construction 1985
- Control: OSP 5020 L.
- Serial number . 2931
with 2 revolvers - Nominal size 300 x 250
- NUMBER OF CONTROL AXES 2 x 2
- Swing diameter over bed guide 400 mm
- Max. Turning diameter: 300 mm
- Max. Workpiece length: 250 mm
- Spindle diameter: 100 mm on the front bearing
- Number of tools: 8
no tailstock
HARDINGE
- 2014.g.
- Turning Ø 231.0 mm
Ø above the bed, 269.0 mm
Ø above transversing slide - Length between centers 350.0 mm
- Type of CNC FANUC OT
- X-axis 135.0 mm
- Z-axis 353.0 mm
- Spindle taper A2-5″
- Spindle bore
- Number of turrets 1.0
- Number of tools on turret 12.0
- Number of rotating tools 4.0
- Turning speed 5000 rpm
- Spindle motor power 7.5 kW
- Tailstock – yes
- Bar feeder – yes
GILDEMEISTER MD 3S
- Type of machine: Cycle lathe
# of CNC axis 2 - Manufacturer, Model: Gildemeister MD 3S
- Control: Eltropilot 10
- Made in: Germany
- Y.O.M: 1982
- Max. diameter over bed: 560 mm
- Max. diameter over support: 200 mm
- Max. turning length: 600 mm
- Equipment: Chip conveyor
- Spindle bore: 73 mm
- 12 station turret
OKUMA LC10 2ST
- Revolver 2
- Werkzeugmagazin: 16 Stk.
- Drehdurchmesser über Bett: 300mm
- Max Dregzahl: 5500rpm
- Stangenlader
FANUC TAPE CENTER D
- X – 500mm
- Y – 380mm
- Z – 400mm
- Max Dregzahl: 4500rpm
EROZIMAT
RAMSAUER AL 500 ANC
- Kreissägeautomat
- Vorschublänge beträgt 500mm Mehrfache
- Vorschublänge bis 9999,9mm
TESA MICRO-HITE 3D
- Messbereich
- hX – 460mm
- hY – 510mm
- hZ – 420mm
- Genauigkeit(qm)
- MPE= bis 3.0+L/250 really fast
TOOL MASTER OKTA 2
- Werkzeugvoreinstellgerät
ATLAS CORPCO GA 15
- Schraubenkompressor
- 15 KW
ALUP
- Schraubenkompressor
- 9 KW
WATER JET
- KMT 6200 BAR
- Radna povrsina – 2000 x 2000 x 300
- Mogucnost secenja svih vrsta materijala od 0.5mm do 300mm
- Godina proizvodnje: 2018
This error message is only visible to WordPress admins
Error: No feed found.
Please go to the Instagram Feed settings page to create a feed.